Table of Contents
Advertisement
xStack® DGS-3620 Series Managed Switch Web UI Reference Guide
Download Firmware
The following window is used to download firmware for the Switch.
Download Firmware from TFTP
This window allows the user to download firmware from a TFTP Server to the Switch and updates the switch.
The fields that can be configured are described below:
Parameter
Unit
TFTP Server IP
Source File
Destination File
Boot Up
Click Download to initiate the download.
Download Firmware from RCP
This window allows the user to download firmware from a RCP Server to the Switch and updates the switch.
Figure 12-5 Download Firmware from TFTP window
Description
Use the drop-down menu to select a unit for receiving the firmware. Select All for all
units.
Enter the TFTP server IP address used.
Click the radio button to enter the TFTP server IP address used.
IPv4
Click the radio button to enter the TFTP server IPv6 address used.
IPv6
Click the radio button to enter the domain name.
Domain Name
Enter the location and name of the Source File.
Enter the location and name of the Destination File.
Tick the check box to set it as a boot up file.
Figure 12-6 Download Firmware from RCP window
451
Advertisement
Table of Contents
