xStack® DGS-3620 Series Managed Switch Web UI Reference Guide
Probe (1-9)
Click the Start button to initiate the Trace Route.
After clicking the Start button, the following page will appear:
Click the Stop button to halt the Trace Route.
Click the Resume button to resume the Trace Route.
Peripheral
Device Environment
The device environment feature displays the Switch internal temperature status.
To view this window, click Monitoring > Peripheral > Device Environment as shown below:
Click the Refresh button to refresh the display table so that new entries will appear.
value of 1 to 65535 seconds can be specified. The default is 5 seconds.
The number of probing. The range is from 1 to 9. If unspecified, the default value is 1.
Figure 11-28 Trace Route Result window
Figure 11-29 Device Environment window
448