Igmp Static Group Settings - D-Link DGS-3620-28PC-SI Product Manual

xStack® DGS-3620 Series Managed Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter Description
Specifies a number from 1 to 255 used to identify the MD5 Key.
Key ID
Specifies an alphanumeric string of between 1 and 16 case-sensitive characters used to
Password
generate the Message Digest which is in turn, used to authenticate OSPF packets within the
OSPF routing domain.
Click the Add button to add a new Key ID with its corresponding password.
Click the Find button to search for the Key ID entered.
Click the View All button to view all the entries.
Click the Edit button to re-configure a specific entry listed.
Click the Delete button to remove a specific entry listed.

IGMP Static Group Settings

This window is used to create an IGMP static group on the switch.
To view the following window, click L3 Features > IGMP Static Group Settings, as shown below:
The fields that can be configured are described below:
Parameter Description
Enter the IP interface on which the IGMP static group resides. The IP interface must be the
Interface
primary IP interface.
Enter the multicast IP address.
Multicast Group
Click the Add button to add a new entry based on the information entered.
Click the Delete button to remove a specific entry listed.
Click the Find button to find the information entered.
Click the View All button to view all the entries.
Figure 5-152 MD5 Settings Window
Figure 5-153 IGMP Static Group Settings window
259