Table of Contents
Advertisement
xStack® DGS-3620 Series Managed Switch Web UI Reference Guide
IP Address
Network Mask
LSDB Type
Advertise
Click the Apply button to accept the changes made.
Click the Edit button to re-configure the selected entry.
Click the Delete button to remove the selected entry.
OSPF Host Router Settings
This window is used to configure OSPF host route settings.
To view the following window, click L3 Features > OSPF > OSPFv2 > OSPF Host Router Settings, as shown
below:
The fields that can be configured are described below:
Parameter
Host Address
Metric
Area ID
Click the Apply button to accept the changes made.
Click the Edit button to re-configure the selected entry.
Click the Delete button to remove the selected entry.
OSPF LSDB Table
This window is used to display the OSPF Link State Database (LSDB).
To view the following window, click L3 Features > OSPF > OSPFv2 > OSPF LSDB Table, as shown below:
Enter the IP address that uniquely identifies the network that corresponds to the OSPF
Area.
Enter the network mask that uniquely identifies the network that corresponds to the OSPF
Area.
Use the drop-down menu to select the type of address aggregation. Options to choose
from are NSSA Ext and Summary.
Use the drop-down menu to enable or disable the advertisement trigger.
Figure 5-42 OSPF Host Router Settings window
Description
Enter the host's IP address used.
Enter a metric between 1 and 65535, which will be advertised.
Enter a 32-bit number in the form of an IP address (xxx.xxx.xxx.xxx) that uniquely
identifies the OSPF area in the OSPF domain.
Figure 5-43 OSPF LSDB Table window
188
Advertisement
Table of Contents
