Table of Contents
Advertisement
xStack® DGS-3620 Series Managed Switch Web UI Reference Guide
From Port / To Port
State
Click the Apply button to accept the changes made for each individual section.
Traffic Segmentation Settings
Traffic segmentation is used to limit traffic flow from a single or group of ports, to a group of ports. This method of
segmenting the flow of traffic is similar to using VLANs to limit traffic, but is more restrictive. It provides a method of
directing traffic that does not increase the overhead of the master switch CPU.
To view this window, click Security > Traffic Segmentation Settings as shown below:
The fields that can be configured are described below:
Parameter
Port List
Forward Port List
Unit
Click the Apply button to accept the changes made.
Select a range of ports to use for this configuration.
Use the drop-down menu to toggle between Enabled and Disabled.
Figure 8-59 Traffic Segmentation Settings window
Description
Enter a port or list of ports to be included in the traffic segmentation setup. Tick the All
Ports check box to select all ports for the configuration.
Enter a port or list of ports to be included in the traffic segmentation setup. Tick the All
Ports check box to select all the ports for the configuration.
Select the unit you want to configure.
368
Advertisement
Table of Contents
