Honeywell LYNXRPK-2 - Wireless Self-Contained Security Syste - LYNXRPK-2 - Wireless Self-Contained Security System Installation And Setup Manual page 46

LYNXR-2 Series Installation and Setup Guide
✻ 81 Zone List Menu Mode
81
Zone List Programming
0 = exit mode
1 = enter mode
A 01
Zone List Number
01-03 = zone list number to be programmed
00 = exit Zone List mode
[✻] = continue
b zz
Zone entry to list
01-41, 95, 96, 99 = zone numbers to add to
zone list
[✻] = accept zone number and enter the next
zone number
00 = accept zone number(s) and continue to
next prompt
C
Delete Entire Zone List
0 = don't delete; continue to next prompt
1 = delete the current zone list
d
Delete Zones from List?
1 = continue to delete zones prompt
0 = don't delete; continue to next zone list
number prompt (A....01)
[#] = return to zone list number prompt (A 01)
E
Delete Zones
Enter each 2-digit zone number to be deleted
from the current zone list, followed by the [✻]
key.
[✻] = delete zone and enter next zone to be
deleted
00 = delete zone and return to next zone list
number prompt (A....01) desired)
Pressing 1 advances to the next prompt below.
Pressing 0 exits mode, upon which this prompt blinks, indicating the mode is inactive.
Enter the Zone List Number 01, 02, or 03 to program (or 00 if no zone lists are used).
Enter each zone number to add to the zone list by first entering the zone number,
then the [✻] key (for example, 01✻ 02✻ 03✻). The system will announce the Voice
Descriptor for the selected zone, if it is programmed. After all desired zones are
enrolled, enter "00" to advance.
Enter "1" to delete the zone list. All zones in the zone list will be deleted automatically
and programming will return to the ZONE LIST NUMBER prompt.
Enter "0" to save the zone list or delete specific zones from the list.
Enter "0" to save the entire zone list. Programming will return to the ZONE LIST
NUMBER prompt.
Enter "1" to delete a zone or zones in a zone list.
When deleting a zone(s) from the zone list, if the selected zone has a Voice Descriptor
programmed, upon deletion it will be announced as a confirmation that it has been
deleted. After all zones to be deleted are entered, enter "00" to return to the ZONE
LIST NUMBER prompt so that another list can be programmed, if desired.
- 46 -