Honeywell LYNXRPK-2 - Wireless Self-Contained Security Syste - LYNXRPK-2 - Wireless Self-Contained Security System Installation And Setup Manual page 35

DOWNLOAD INFORMATION (
✻94
Download Call Back Phone Number
Enter up to 20 digits as follows: 0–9, # +11 for "*", # + 12
for "#", # + 13 for a pause.
✻95
Ring Detection Count For
Downloading/ Remote Phone Control
0 = disable station initiated download and remote phone
1-14 = number of rings before control picks up phone line
15 = defeat answering machine
✻ ✻
94, 95)
This is the phone number the control will use to call back the
downloading computer.
Do not fill unused spaces. End field by pressing ✻ . To clear entries from
field, press ✻ 94 ✻ .
Enter "15" to select defeat answering machine mode. If an answering
machine is on the premises, you need to dial the premises and hang up
on the first ring. Wait at least five (5) seconds (but no more than 22
seconds) and dial the premises phone number again. The control will
pick up and announce "SYSTEM ENTER CODE" every three seconds.
Note: To enter a number higher than 9 you must first press the [#] key.
- 35 -
LYNXR-2 Series Installation and Setup Guide
Data Field Descriptions