Edit Ips: Ips Policies - Cisco ROUTER-SDM-CD User Manual

Edit IPS
SDEE Messages Button
Signatures Button
NM CIDS Button

Edit IPS: IPS Policies

Interfaces
Enable Button
Edit Button
Cisco Router and Security Device Manager 2.5 User's Guide
27-10
Secure Device Event Exchange (SDEE) messages report on the progress of Cisco
IOS IPS initialization and operation. Click to display the
Messages window, where you can review SDEE messages and filter them to
display only error, status, or alert messages.
Click to display the Edit IPS: Signatures
signatures on the router.
This button is visible if a Cisco Intrusion Detection System network module is
installed in the router. Click to manage the IDS module.
This window displays the Cisco IOS IPS status of all router interfaces, and allows
you to enable and disable Cisco IOS IPS on interfaces.
Use this list to filter the interfaces shown in the interface list area. Choose one of
the following:
All interfaces—All interfaces on the router.
•
IPS interfaces—Interfaces on which Cisco IOS IPS has been enabled.
•
Click to enable Cisco IOS IPS on the specified interface. You can specify the
traffic directions to which Cisco IOS IPS is to be applied, and the ACLs used to
define the type of traffic you want to examine. See
Interface for more information.
Click to edit the Cisco IOS IPS characteristics applied to the specified interface.
Chapter 27
Edit IPS: SDEE
window where you can manage
Enable or Edit IPS on an
Cisco IOS IPS
OL-4015-12