Page 1
Installation Guide for Cisco Unified Videoconferencing Manager Release 5.5 March 2008 Americas Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 http://www.cisco.com Tel: 408 526-4000 800 553-NETS (6387) Fax: 408 527-0883 Customer Order Number: Text Part Number: OL-14925-01...
Page 2
Bringing the Meeting To You, Catalyst, CCDA, CCDP, CCIE, CCIP, CCNA, CCNP, CCSP, CCVP, Cisco, the Cisco Certified Internetwork Expert logo, Cisco IOS, Cisco Press, Cisco Systems, Cisco Systems Capital, the Cisco Systems logo, Cisco Unity, Collaboration Without Limitation, EtherFast, EtherSwitch, Event Center, Fast Step,...
Installing Cisco Unified Videoconferencing Manager C H A P T E R Pre-installation Minimum System Requirements Server Operating System LDAP Server Types Supported Devices SNMP Service Port Requirements How to Install Cisco Unified Videoconferencing Manager Installing Cisco Unified Videoconferencing Manager Installing Cisco Unified Videoconferencing Desktop How to Perform Post-installation Procedures Confirming Installation...
SNMP Service, page 1-2 • Port Requirements, page 1-3 Minimum System Requirements Cisco Unified Videoconferencing Manager must be installed on one of the following Cisco MCS server models: • Cisco MCS 7825 Series – MCS-7825-H2 MCS-7825-I2 – MCS-7825-H3 – MCS-7825-I3 –...
Pre-installation Cisco MCS 7845 Series • MCS-7845-H2 – MCS-7845-I2 – Server Operating System The Cisco Media Convergence Server (MCS) server operating system is shipped with the Cisco Unified Videoconferencing Manager software. For information about downloading the MCS operating system software updates from Cisco.com, refer to the Release Notes for Cisco Unified Videoconferencing Manager Release 5.5.
Chapter 1 Installing Cisco Unified Videoconferencing Manager Port Requirements Table 1-1 shows the required ports for Cisco Unified Videoconferencing Manager. Make sure all required ports are available. Table 1-1 Protocol Ports Type Direction Cisco Unified Videoconferencing Manager Server Ports HTTP In from Web 3336 In from Desktop...
How to Install Cisco Unified Videoconferencing Manager How to Install Cisco Unified Videoconferencing Manager During Cisco Unified Videoconferencing Manager installation Resource Manager and Network Manager components are installed. The Desktop component of Cisco Unified Videoconferencing Manager is installed separately. • Installing Cisco Unified Videoconferencing Manager, page 1-4 •...
Chapter 1 Installing Cisco Unified Videoconferencing Manager Installing Cisco Unified Videoconferencing Desktop During the installation you perform a basic Desktop configuration by defining servers which Desktop uses. Follow recommendations in this section to configure Desktop correctly: • In a single Cisco Unified Videoconferencing 3545 MCU deployment, use the same gatekeeper as Cisco Unified Videoconferencing 3545 MCU is configured to use.
Page 10
How to Install Cisco Unified Videoconferencing Manager In the Configure Servers window, configure server settings: Step 10 Enter the IP address of your gatekeeper in the Gatekeeper IP address field. Enter the server’s NIC IP address in the IP address field under Use Cisco Unified Videoconferencing Manager for moderation.
Chapter 1 Installing Cisco Unified Videoconferencing Manager The light next to each link indicates whether or not the connection to the target server or Note registration with the Gatekeeper is successful. When the light is red, a tooltip containing error details is available. Click the red light to view further error information. Remove the product CD-ROM.
How to Perform Post-installation Procedures Logging in for the First Time Procedure Access either Resource Manager or Network Manager login windows from the Start menu of the local Step 1 server. Log in to Resource Manager for the first time. Step 2 The User Provisioning window opens.
Backup and Restore Procedures This section is intended to assist system administrators to back up and restore the Cisco Unified Videoconferencing Manager database and configuration files. Overview, page 2-1 • How to Perform Backup Procedure, page 2-2 • How to Perform Restore Procedure, page 2-4 •...
How to Perform Backup Procedure How to Perform Backup Procedure Backing Up the Database, page 2-2 • Backing Up Configuration Files, page 2-2 • Backing Up Branding and Sound Files, page 2-3 • Backing Up the License, page 2-3 • Backing Up the Internal Gatekeeper Configuration File, page 2-4 •...
Chapter 2 Backup and Restore Procedures Network Manager Configuration Files, page 2-3 • Backing Up Branding and Sound Files, page 2-3 • Database Connectivity Property File Place the mysql-ds.xml file under C:\Program Files\Cisco\Unified Videoconferencing Manager\CUVCMRM\jboss\server\default\deploy. This is the default JBOSS_HOME directory for Cisco Unified Videoconferencing Manager version 5.1. Note For older versions, the JBOSS_HOME directory may be different.
How to Perform Restore Procedure Backing Up the Internal Gatekeeper Configuration File Go to the Web interface of the internal gatekeeper on port 8011 and click Export to save the configuration files of the internal gatekeeper. How to Perform Restore Procedure This section describes how to restore Cisco Unified Videoconferencing Manager data.
Chapter 2 Backup and Restore Procedures In the DOS window, enter the “mysql -u root” command to access the MySQL database command line Step 3 user interface. The command link prompt changes to mysql>. Run the following command to restore the content that has been dumped into the backup file to the Step 4 database: mysql>...
Page 20
Chapter 2 Backup and Restore Procedures How to Perform Restore Procedure Installation Guide for Cisco Unified Videoconferencing Manager Release 5.5 OL-14925-01...