Add Or Edit A Management Policy - Cisco ROUTER-SDM-CD User Manual

Chapter 31 Router Properties
Discard Changes Button

Add or Edit a Management Policy

Type
IP Address/Subnet Mask
Interface
Management Protocols
OL-4015-12
Click to discard changes you made in the Add or Edit a Management Policy
window to the router configuration. The changes you made are discarded and
removed from the Configure Management Access Policies window.
Use this window to add or edit a management policy.
Specify whether the address you provide is the address of a host or a network.
If you specified Network in the Type field, enter the IP address of a host, or the
network address and subnet mask. For more information, see
Subnet Masks.
Choose the interface through which you want to allow management traffic. The
interface should be the most direct route from the host or network to the local
router.
Specify the management protocols allowed for the host or network.
Allow SDM
Check to allow the specified host or network to access Cisco SDM. When you
check this box, the following protocols are automatically checked: Telnet, SSH,
HTTP, HTTPS, and RCP. Checking this option does not prevent you from
allowing additional protocols.
Cisco Router and Security Device Manager 2.5 User's Guide
vty Settings
IP Addresses and
31-19