Add Or Edit Usb Token - Cisco ROUTER-SDM-CD User Manual

USB Tokens
Removal Timeout
Secondary Config File

Add or Edit USB Token

Token Name
Current PIN
Cisco Router and Security Device Manager 2.5 User's Guide
19-20
Displays the maximum number of seconds that Cisco SDM will continue to use
Internet Key Exchange (IKE) credentials obtained from the USB token after the
token is removed from the router.
If Removal Timeout is empty, the default timeout is used. The default timeout is
triggered when a new attempt to access the IKE credentials is made.
Displays the configuration file that Cisco SDM attempts to find on the USB token.
The configuration file can be a CCCD file or a .cfg file.
CCCD refers to a boot configuration file. On USB tokens, a CCCD file is loaded
using TMS software.
This window allows you to add or edit USB token logins.
If you are adding a USB token login, enter the USB token name. The name you
enter must match the name of the token that you want to log in to.
A token name is set by the manufacturer. For example, USB tokens manufactured
by Aladdin Knowledge Systems are named eToken.
You can also use the name "usbtokenx", where x is the number of the USB port to
which the USB token is connected. For example, a USB token connected to USB
port 0 is named usbtoken0.
If you are editing a USB token login, the Token Name field cannot be changed.
If you are adding a USB token login, or if you are editing a USB token login that
has no PIN, the Current PIN field displays <None>. If you are editing a USB token
login which has a PIN, the Current PIN field displays ******.
Chapter 19 Public Key Infrastructure
OL-4015-12