Sfp Module; Installing And Removing The Sfp Modules - Cisco ASA5500-HW - Hardware Accessory Kit Network Device Hardware Installation Manual

Chapter 4 Maintenance and Upgrade Procedures
Figure 4-17

Installing and Removing the SFP Modules

The SFP module is a hot-swappable input/output device that plugs into the SFP ports. The Cisco ASA
5500-X series chassis support the following SFP module types:
•
•
This section describes how to install and remove the SFP modules in the ASA to provide optical Gigabit
Ethernet connectivity, and it includes the following topics:
•
•
•

SFP Module

The ASA uses a field-replaceable SFP module to establish Gigabit Ethernet connections.
the supported SFP modules.
Table 4-1
SFP Module
1000BASE-LX/LH
1000BASE-SX
Verify Power Indicators are Green
PS0
Long wavelength/long haul 1000BASE-LX/LH (GLC-LH-SM=)
Short wavelength 1000BASE-SX (GLC-SX-MM=)
SFP Module, page 4-13
Installing the SFP Module, page 4-15
Removing the SFP Module, page 4-15
Supported SFP Modules
Type of Connection
Fiber-optic
Fiber-optic
Installing and Removing the SFP Modules
PS1
Cisco Part Number
GLC-LH-SM=
GLC-SX-MM=
Cisco ASA 5500-X Series Hardware Installation Guide
Table 4-1 lists
4-13