Cisco ASA5500-HW - Hardware Accessory Kit Network Device Hardware Installation Manual page 40

Installing an I/O Card in the Cisco ASA 5512-X, 5515-X, and 5525-X Chassis
Figure 4-3
1 I/O Card holder
2 Power supply
You must disconnect the blue Regex flexible circuit connector from the motherboard before removing
Caution
the I/O card from the chassis. The copper-colored Regex flexible circuit can break during the I/O card
removal or installation process, so handle it with care.
To expose the blue connector of the Regex flexible circuit, push down on the center of the green
Step 6
connector clamp, and lift the right end of the clamp to release the lock. (See
Figure 4-4
Cisco ASA 5500-X Series Hardware Installation Guide
4-4
I/O Card Location
1
Removing the Connector Clamp
-A- -A- -A- -A-
-B- -B- -B- -B-
-B- -B- -B- -B-
-A- -A- -A- -A-
-C- -C- -C- -C-
PUSH AND LIFT TAB
-B- -B-
Chapter 4
2
-B- -B- -B- -B-
Maintenance and Upgrade Procedures
Figure 4-4.)