Cisco ASA5500-HW - Hardware Accessory Kit Network Device Hardware Installation Manual page 21

Chapter 1 ASA Chassis Overview
6
7
Rear Panel Ports
This section describes the rear panel ports on the Cisco ASA 5500-X series chassis.
Figure 1-4
Figure 1-4
.
1
2
3
4
5
LED
HD0
HD1
shows the ports for the ASA 5512-X, ASA 5515-X, and ASA 5525-X models.
Rear Panel Ports for the ASA 5512-X, ASA 5515-X, and ASA 5525-X
LED
Management 0/0 interface
Power supply
RJ-45 ports
USB Ports
Console port
Description
Indicates Hard Disk Drive 0 status:
Flashing green—Proportioned to read/write activity.
•
Solid amber—Hard disk drive failure.
•
Off—No hard disk drive present.
•
Indicates Hard Disk Drive 1 status:
Flashing green—Proportioned to read/write activity.
•
Solid amber—Hard disk drive failure.
•
Off—No hard disk drive present.
•
1
5 4 3
Description
Indicates the Gigabit Ethernet interface that is restricted to
management use only. Connect with an RJ-45 cable.
(See the "Management 0/0 Interface on the ASA 5500-X Series"
section on page 1-3.)
Indicates the status of the power supply.
Indicates the Gigabit Ethernet customer data interfaces.
The top row port numbers are (from left to right) 5, 3, 1.
The bottom row port numbers are (from left to right) 4, 2, 0.
Indicates the two USB standard ports.
(See the "External USB Support" section on page
Indicates the console port that directly connects a computer to the
ASA.
Cisco ASA 5500-X Series Hardware Installation Guide
ASA Chassis Panels
2
1-2.)
1-9