Cisco ASA5500-HW - Hardware Accessory Kit Network Device Hardware Installation Manual page 42

Installing an I/O Card in the Cisco ASA 5512-X, 5515-X, and 5525-X Chassis
Figure 4-6
1
1
1
Index finger placement
2 Thumb placement
Insert the new I/O card into the chassis. (See
Step 9
criteria are met:
The PCIe bus is properly inserted on the motherboard
a.
The small black plastic guide slides all the way into the chassis
b.
The two hooks on the assembly plug into the two slots on the edge of the chassis
c.
Figure 4-7
Cisco ASA 5500-X Series Hardware Installation Guide
4-6
Lift the I/O Card Upward to Release it
Installing the I/O Card
Chapter 4 Maintenance and Upgrade Procedures
2
2
Figure 4-7.) The I/O card fits properly if the following