Cisco ASA5500-HW - Hardware Accessory Kit Network Device Hardware Installation Manual page 41

Chapter 4 Maintenance and Upgrade Procedures
Step 7 Disconnect the blue Regex cable connector from the motherboard by lifting carefully but firmly. (See
Figure
Figure 4-5
Step 8 Lift the I/O card out of the chassis with both hands by placing an index finger into each of the card cover
vents and placing your thumbs on the edge of the card cover. (See
and a gentle rocking motion, as the card is firmly seated.
Keep hands clear of all electronics underneath the card cover.
Caution
4-5.)
Removing the Regex Cable Connector
-B- -B- -B- -B-
-B- -B- -B- -B-
-A- -A- -A- -A-
-C- -C- -C- -C-
-B- -B-
Installing an I/O Card in the Cisco ASA 5512-X, 5515-X, and 5525-X Chassis
-A- -A- -A- -A-
-B- -B- -B- -B-
Figure
Cisco ASA 5500-X Series Hardware Installation Guide
4-6.) Use firm upward pressure
4-5