Chapter 3 Installing The Anyconnect Client And Configuring The Security Appliance With Asdm - Cisco 5505 - ASA Firewall Edition Bundle Administrator's Manual

Installing the AnyConnect Client and Configuring
the Security Appliance with ASDM
Installing the client on the security appliance consists of copying a client image to the security appliance
and identifying the file to the security appliance as a client image. With multiple clients, you must also
assign the order in which the security appliance loads the clients to the remote PC.
Note The AnyConnect client configuration uses the same parameters as the SSL VPN Client. Many of the file
names, panel names, and ASDM navigation elements, as well as most of the CLI commands include the
prefix svc, indicating this similarity.
Perform the following steps to install the client:
Load the AnyConnect client images to the security appliance. On the ASDM toolbar, click
Step 1
Configuration. The navigation pane displays features to configure.
Step 2 In the navigation pane, click Remote Access VPN. The navigation pane displays VPN features.
Step 3 Choose Network (Client) Access > Advanced > SSL VPN > Client Settings. The SSL VPN Client
Settings panel displays.
This panel lists any AnyConnect client files that have been identified as AnyConnect client images. The
order in which they appear in the table reflects the order in which they download to the remote computer.
OL-12950-012
(Figure 3-1).
C H A P T E R
Cisco AnyConnect VPN Client Administrator Guide
3
3-1