Prompting Remote Users - Cisco 5505 - ASA Firewall Edition Bundle Administrator's Manual

Prompting Remote Users

Prompting Remote Users

To enable the security appliance to prompt remote AnyConnect VPN client users to download the client,
select Configuration > Device Management > Users/AAA > User Accounts > Add or Edit. The Add or
Edit dialog box appears. In the navigation panel on the left, select VPN Policy > SSL VPN Client >
Login Setting
Figure 5-3
Deselect the Inherit check box, if necessary, and in the Post Login Setting area, select the option Prompt
user to choose. To disable this option, select Do not prompt user to choose.
When you enable the prompting option, another field becomes available, asking you to specify the
number of seconds the user has to choose before the Default Post Login selection takes effect.
Select the Default Post Login selection to specify the action that the AnyConnect client takes if the user
does not make a selection before the timer specified in the prompting option expires. The options are:
•
•
Cisco AnyConnect VPN Client Administrator Guide
5-4
(Figure 5-3).
Edit User Account Dialog Box for Prompt Setting
Go to Clientless SSL VPN Portal—Immediately displays the portal page for Clientless SSL VPN.
The user can still invoke the AnyConnect client from the portal by clicking Start AnyConnect Client.
Download SSL VPN Client—Immediately starts downloading the AnyConnect client to the remote
user's PC.
Chapter 5 Configuring AnyConnect Features Using ASDM
OL-12950-012