Chapter 3
Scenario: IPsec Remote-Access VPN Configuration
Step 2
Verifying the Remote-Access VPN Configuration
78-17645-01
Enable split tunneling by checking the Enable Split Tunneling check
Note
box at the bottom of the screen. Split tunneling allows traffic outside the
configured networks to be sent out directly to the Internet instead of over
the encrypted VPN tunnel.
Click Next to continue.
In Step 11 of the VPN Wizard, review the configuration attributes for the VPN
tunnel you just created. The displayed configuration should be similar to the
following:
Implementing the IPsec Remote-Access VPN Scenario
PIX 515E Security Appliance Getting Started Guide
3-17