Setting Up Your Router For Internet Access - NETGEAR DGN3500 - Wireless-N Gigabit Router Setup Manual

Setting Up Your Router for Internet Access

When configuring your wireless router manually, you must log in to your wireless-N modem
router to set it up initially and to make any changes to your wireless router's settings later.
The factory default state is reset when you press the Reset button on the back panel.
See "Restoring the Default Configuration and Password" on page 35
information.
To access the router:
1. Type http://192.168.0.1 in the address field of your browser, and then click Enter.
You can also enter either of these addresses to connect to your wireless router:
http://www.routerlogin.net or http://www.routerlogin.com.
.
Figure 12
A login window similar to the one shown in
Figure 13
18
Figure 13
Installing Your Router Manually (Advanced, Mac, and Linux Users)
will display.
for more