Connecting A Css 11503 Power Cord; Connecting A Css 11503 Ac Power Cord; Figure 2-12 Connecting A Css 11503 Ac Power Cord - Cisco CSS11501 - 100Mbps Ethernet Load Balancing Device Hardware Installation Manual

Chapter 2 Cabling and Troubleshooting the CSS

Connecting a CSS 11503 Power Cord

Connecting a CSS 11503 AC Power Cord

78-13884-06
3. Plug the power cord into a dedicated 3-wire grounding receptacle.
To power on the CSS, see the
4.
The following sections provide information on:
Connecting a CSS 11503 AC Power Cord
•
• Connecting a CSS 11503 DC Power Cord
To connect an AC power cord to a CSS 11503:
1. At the rear of the chassis, ensure that the CSS power switch is in the O (off)
position.
2. Plug the AC power cord connector into the CSS power connector, as shown
in Figure 2-12.

Figure 2-12 Connecting a CSS 11503 AC Power Cord

1
2
1
Power switch
Cisco 11500 Series Content Services Switch Hardware Installation Guide
"Powering Up the CSS"
~
1 0 0 -2 4 0 V
5 0 -6 0 H z
5 A
4 3 0 W
2
AC power connector
Connecting the Power Cord
section.
2-27