Class A Emc Warning; Safety Requirements - Cisco CSS11501 - 100Mbps Ethernet Load Balancing Device Hardware Installation Manual

11500 series content services switch
Hide thumbs Also See for CSS11501 - 100Mbps Ethernet Load Balancing Device:
Table of Contents

Advertisement

Appendix D

Safety Requirements

Class A EMC Warning

Warning
Safety Requirements
Cisco 11500 Series Content Services Switch Hardware Installation Guide
D-10
Regulatory Compliance and Safety Information for the Cisco 11500 Series Content Services Switch
This is a Class A Device and is registered for EMC requirements for industrial
use. The seller or buyer should be aware of this. If this type was sold or
purchased by mistake, it should be replaced with a residential-use type.
This section identifies safety requirements with which Cisco Content Services
Switches comply.
US
UL 60950 Third Edition - Safety of Information Technology Equipment.
Canada
CAN/CSA 22.2 No. 60950-00 Third Edition - Safety of Information Technology
Equipment.
Europe
EN 60950 - Safety of Information Technology Equipment; incorporating
Amendments 1, 2, 3, 4, and 11 with all National Deviations.
IEC 60950 Second Edition - Safety of Information Technology Equipment;
incorporating Amendments 1, 2, 3, and 4.
78-13884-06

Advertisement

Table of Contents
loading

Table of Contents