Icr - D-Link DCS-3112 User Manual

Section 3 - Configuration
You may configure the ICR settings here. An IR(Infrared) Cut-Removable(ICR) filter can be disengaged for increased sensitivity in low light
environments.
Automatic:
Day Mode:
Night Mode:
Schedule Mode:
DC Power Output:
D-Link DCS-3112 User Manual
The Day/Night mode is set automatically.
Generally, the camera uses Day mode and
switches to Night mode when needed.
Day mode enables the IR Cut Filter.
Night mode disables the IR Cut Filter.
Set up the Day/Night mode using a schedule.
The camera will enter Day mode at the starting
time and return to Night mode at the ending
time.
The DC 12V Power Output port can supply 12V
DC, 200mA of power to another device (such as
a spotlight or infrared lamp). Its default setting
is Off, meaning it will not supply power. You
can select On to turn on the power supply. If
you choose Sync With ICR, the power output
will be enabled whenever the IR Cut Filter is
active. Alternatively, you can select Schedule
and manually specify when the power should
be enabled.
DC Power Output
12V DC, 200mA

ICR

48