D-Link DCS-3112 User Manual
Surveillance network camera
Hide thumbs
Also See for DCS-3112:
- Quick installation manual (69 pages) ,
- User manual (68 pages) ,
- Quick install manual (13 pages)
Table of Contents
Advertisement
Quick Links
Download this manual
See also:
User Manual
Advertisement
Table of Contents
Related Manuals for D-Link DCS-3112
Summary of Contents for D-Link DCS-3112
-
Page 2: Table Of Contents
Audio and Video ..........30 DI/DO ..............55 Motion Detection ..........32 Technical Specifications ........56 Time and Date ..........33 Event Setup ............. 34 Application ............35 Add Server ............36 Add Media ............37 D-Link DCS-3112 User Manual... -
Page 3: Manual Revisions
Preface D-Link reserves the right to revise this publication and to make changes in the contents hereof without obligation to notify any person or organization of such revisions or changes. Manual Revisions Revision Date Description June 21, 2011 DCS-3112 Revision A1 with firmware version V1.00 November 02, 2012 DCS-3112 Revision A1 with firmware version V1.10... -
Page 4: Product Overview
Ver. 2.00 (WW) DCS-3112 Camera Stand DCS-3112 Manual and Wizard Network Camera on CD-ROM C-CS Mount Adapter CAT5 Ethernet Power Adapter (5mm Ring) Cable If any of the above items are missing, please contact your reseller. D-Link DCS-3112 User Manual... -
Page 5: Hardware Overview
External Audio Input connector Power and network indicator Reset Press and hold this button for 10 seconds I/O Connector to reset the camera I/O connectors for external devices Audio Out Video analog output Audio Output for external speakers D-Link DCS-3112 User Manual... -
Page 6: Front
Hardware Overview Front Lens Connector ICR Sensor Connect to a CS mount The IR-Cut Removable sensor judges lighting conditions and switches from color to infrared accordingly D-Link DCS-3112 User Manual... - Page 7 Connector for DC auto iris lens DIP Switch Toggles several different camera options 1. AES: Auto Electric Shutter 2. DC IRIS: Use an auto iris (DC drive) 3. NTSC: TV output signal selector 4. PAL: TV output signal selector D-Link DCS-3112 User Manual...
- Page 8 Hardware Overview SD Card Slot Local SD card for storing recorded images and video D-Link DCS-3112 User Manual...
-
Page 9: Configuration With Wizard
Configuration with Wizard Insert the DCS-3112 CD into your computer's CD-ROM drive to begin the installation. If the Autorun function on your computer is disabled, or if the D-Link Launcher fails to start automatically, click Start > Run. Type D:\autorun.exe, where D: represents the drive letter of your CD-ROM drive. - Page 10 Hardware Overview Click Yes to accept the License Agreement. To start the installation process, click Next. Note: The installation may take several minutes to finish. D-Link DCS-3112 User Manual...
- Page 11 Hardware Overview Click Finish to complete the installation. Click on the D-Link Setup Wizard SE icon that was created in your Windows Start menu. Start > D-Link > Setup Wizard SE D-Link DCS-3112 User Manual...
- Page 12 Click the Wizard button to continue. Enter the Admin ID and password. When logging in for the first time, the default Admin ID is admin with the password left blank. Click Next, to proceed to the next page. D-Link DCS-3112 User Manual...
- Page 13 Select DHCP if your camera obtains an IP address automatically when it boots up. Select static IP if the camera will use the same IP address each time it is started. Click Next, to proceed to the next page. Take a moment to confirm your settings and click Restart. D-Link DCS-3112 User Manual...
-
Page 14: Configuration
Configuration Configuration Web-based Configuration Utility This section explains how to configure your new D-Link Network Camera using the Web-based Configuration Utility. Click on the D-Link Setup Wizard SE icon that was created in your Windows Start menu. Start > D-Link > Setup Wizard SE Select the camera and click the button labeled "Link"... - Page 15 This section shows your camera’s live video. You can select your video profile and view or operate the camera. For additional information about web configuration, please refer to the user manual included on the CD-ROM or the D-Link website. D-Link DCS-3112 User Manual...
-
Page 16: D-Viewcam Setup Wizard
D-ViewCam Setup Wizard D-ViewCam software is included for the administrator to manage multiple D-Link IP cameras remotely. You may use the software to configure all the advanced settings for your cameras. D-ViewCam is a comprehensive management tool for IP surveillance. - Page 17 Configuration Click Finish to complete the installation. To start D-ViewCam, select Start > All Programs > D-Link D-ViewCam > Main Console. For more detail operation of using D-ViewCam software, please refer to D-ViewCam Manual. D-Link DCS-3112 User Manual...
-
Page 18: Live Video
Recording a Video Clip Set a Storage Folder This control pad can be used to pan, tilt, and zoom Listen/Stop Listening Control Pad within the camera's predefined view area, if one Talk/Stop Talking has been defined. Start/Stop Digital Output D-Link DCS-3112 User Manual... - Page 19 You may select the interface language using this menu. The ROI will pan from back available options are English and Traditional Chinese. and forth within the Stop Stops the camera ePTZ motion Preset Path Starts the camera's motion along the predefined path D-Link DCS-3112 User Manual...
-
Page 20: Setup
Internet Connection Setup Wizard This wizard will guide you through a step-by-step process to configure your new D-Link Camera and connect the camera to the internet. Click Next to continue. Note: Select DHCP if you are unsure of which settings to choose. - Page 21 If you have a Dynamic DNS account and would like the camera to update your IP address automatically, Select Enable DDNS and enter your host information. Click Next to continue. Enter a name for your camera and click Next to continue. D-Link DCS-3112 User Manual...
- Page 22 If you have selected DHCP, you will see a summary of your settings, including the camera's IP address. Please write down all of this information as you will need it in order to access your camera. Click Apply to save your settings. D-Link DCS-3112 User Manual...
-
Page 23: Motion Detection Setup Wizard
Please see the Motion Detection section on page 27 for information about how to configure motion detection. Step 2 This step allows you to enable motion detection based on a customized schedule. Specify the day and hours. You may also choose to always record motion. D-Link DCS-3112 User Manual... - Page 24 Click Next to continue. Step 4 You have completed the Motion Detection Wizard. Please verify your settings and click Apply to save them. Please wait a few moments while the camera saves your settings and restarts. D-Link DCS-3112 User Manual...
-
Page 25: Network Setup
Enabling this setting allows your camera to be configured as a UPnP device on your network. Enable UPnP Port Enabling this setting allows the camera to add port forwarding entries into the router automatically on Forwarding: a UPnP capable network. D-Link DCS-3112 User Manual... - Page 26 PDAs. The default port number is 554. You may specify the address of a particular stream. For instance, live1.sdp can be accessed at rtsp://x.x.x.x/video1.sdp where the x.x.x.x represents the ip address of your camera. D-Link DCS-3112 User Manual...
- Page 27 The DCS-7513 allows you to multicast each of the available streams via group address and specify the TTL value for each stream. Enter the port and TTL settings you wish to use if you do not want to use the defaults. D-Link DCS-3112 User Manual...
-
Page 28: Dynamic Dns
Enter your user name or e-mail used to connect to the DDNS. Password: Enter your password used to connect to the DDNS server. Timeout: Enter DNS Timeout values. Status: Indicates the connection status, which is automatically determined by the system. D-Link DCS-3112 User Manual... -
Page 29: Image Setup
This setting controls the amount of coloration, from grayscale to fully saturated. Sharpness: Specify a value from 0 to 8 for image edge enhancement. Reset Default: Click this button to reset the image to factory default settings. D-Link DCS-3112 User Manual... -
Page 30: Audio And Video
The bps will affect the bit rate of the video recorded by the camera. Higher bit rates result in higher video quality. Fixed quality: Select the image quality level for the camera to try to maintain. High quality levels will result in increased bit rates. D-Link DCS-3112 User Manual... - Page 31 This setting controls the amount of gain applied to incoming audio to increase its volume. Audio out off: Ticking this checkbox will mute outgoing audio. Audio out volume level: This setting controls the amount of gain applied to outgoing audio to increase its volume. D-Link DCS-3112 User Manual...
-
Page 32: Motion Detection
Right clicking on the camera image brings up the following menu options: Select All: Draws a motion detection area over the entire screen. Clear All: Clears any motion detection areas that have been drawn. Restore: Restores the previously specified motion detection areas. D-Link DCS-3112 User Manual... -
Page 33: Time And Date
NTP server. NTP Server: Network Time Protocol (NTP) synchronizes the DCS-3112 with an Internet time server. Choose the one that is closest to your location. Set the Date and Time This option allows you to set the time and date manually. -
Page 34: Event Setup
2. To delete the selected item from the pull-down menu of event, server or media, click Delete. 3. Click on the item name to pop up a window for modifying. Note: You can add up to four events, five servers, and five media fields. D-Link DCS-3112 User Manual... -
Page 35: Application
Application In a typical application, when motion is detected, the DCS-3112 Network Camera sends images to a FTP server or via e-mail as notifications. As shown in the illustration below, an event can be triggered by many sources, such as motion detection or external digital input devices. -
Page 36: Add Server
Enter the configuration for the target e-mail server account. FTP: Enter the configuration for the target FTP server account. Network Storage: Specify a network storage device. Only one network storage device is supported. SD Card: Use the camera's onboard SD card storage. D-Link DCS-3112 User Manual... -
Page 37: Add Media
The maximal file size would be generated. File name prefix: The prefix name will be added on the file name of the video clip. System log: Select this option to save events to the camera system log. D-Link DCS-3112 User Manual... -
Page 38: D-Link Dcs-3112 User Manual
Select this option to add a date and time to the file name suffix. SNAPSHOTS20080104_100341 Date and time suffix File name prefix The format is: YYYYMMDD_HHMMSS Maximum duration Specify the maximal recording duration in seconds. You can set up to ten seconds. For example: D-Link DCS-3112 User Manual... -
Page 39: D-Link Dcs-3112 User Manual
8 sec. 9 sec. 10 sec. The moment the trigger is activated. File name prefix Enter the text that will be added at the beginning of the file name. VIDEOS20080104_100341 Date and time suffix File name prefix The format is: YYYYMMDD_HHMMSS D-Link DCS-3112 User Manual... -
Page 40: Add Event
Select Always or enter the time interval. Trigger D/O: Select to trigger the digital output for a specific number of seconds when an event occurs. Server: Specify the location where the event information should be saved to. D-Link DCS-3112 User Manual... -
Page 41: Add Recording
Please note that if the free HDD space is not enough, the recording will stop. Before you set up this option please make sure your HDD has enough space, and it is better to not save other files in the same folder as recording files. D-Link DCS-3112 User Manual... - Page 42 Time of each file for If this is selected, files will be separated based on the recording: maximum length you specify. The prefix name will be added on the file name of the File Name Prefix: recording file(s). D-Link DCS-3112 User Manual...
-
Page 43: Sd Card
Playback Recorded Video: If video files are stored on the SD card, click on the video folder and choose the video file you would like to view. Refresh: Reloads the file and folder information from the SD card. D-Link DCS-3112 User Manual... -
Page 44: Advanced
"Closed." LED: You may specify whether or not to illuminate the LED on the side of the camera. Video Output: Enable/ disable the BNC terminal TV output signal. D/I and D/O Pin Block D-Link DCS-3112 User Manual... -
Page 45: Rs-485
The more bits used for stop bits, the greater the lenience in synchronizing the different clocks but the slower the data transmission rate. The stop bit can be set to 1 or 2. The default value is 1. D-Link DCS-3112 User Manual... -
Page 46: Icr
Sync With ICR, the power output will be enabled whenever the IR Cut Filter is active. Alternatively, you can select Schedule and manually specify when the power should be enabled. DC Power Output 12V DC, 200mA D-Link DCS-3112 User Manual... -
Page 47: Https
Create a certificate request and install Status: Displays the status of the certificate. Note: The certificate cannot be removed while the HTTPS is still enabled. To remove the certificate you must first uncheck Enable HTTPS secure connection. D-Link DCS-3112 User Manual... -
Page 48: Access List
Configuration Access List Here you can set access permissions for users to view your DCS-3112. Allow list: The list of IP addresses that have the access right to the camera. Start IP address: The starting IP Address of the devices (such as a computer) that have permission to access the video of the camera. -
Page 49: Maintenance
Enable OSD: Select this option to enable the On-Screen Display feature for your camera. Label: Enter a label for the camera. Show Time: Select this option to enable the time-stamp display on the video screen. D-Link DCS-3112 User Manual... -
Page 50: Backup And Restore
Browse and then restore the pre-defined settings to your camera by clicking Load Configuration. Restore to Factory Default: You may reset your camera and restore the factory settings by clicking Restore Factory Defaults. Reboot Device: This will restart your camera. D-Link DCS-3112 User Manual... -
Page 51: Firmware Upgrade
Configuration Firmware Upgrade The camera's current firmware version will be displayed on this screen. You may visit the D-Link Support Website to check for the latest available firmware version. To upgrade the firmware on your DCS-3112, please download and save the latest firmware version from the D-Link Support Page to your local hard drive. -
Page 52: Status
Configuration Status Device Info This page displays detailed information about your device and network connection. D-Link DCS-3112 User Manual... -
Page 53: Logs
Configuration Logs This page displays the log information of your camera. You may download the information by clicking Download. You may also click Clear to delete the saved log information. D-Link DCS-3112 User Manual... -
Page 54: Help
Configuration Help This page provides helpful information regarding camera operation. D-Link DCS-3112 User Manual... -
Page 55: Appendix
Appendix Appendix DI/DO Schematics DI/DO D-Link DCS-3112 User Manual... -
Page 56: Technical Specifications
ƒ RS-485 ƒ Video output Network IPv4, TCP/IP, UDP, ICMP, DHCP Client, NTP Client (D-Link), DNS Client, DDNS Client (D-Link), SMTP Client, FTP Client, HTTP/HTTPS, Network Protocols Samba Client, PPPoE, UPnP Port Forwarding, RTP/RTSP/RTCP, IP filtering, 3GPP, IGMP, ONVIF compliant ƒ... - Page 57 0 to 40 ˚C (32 to 104 ˚F) Temperature Storage Temperature -20 to 70 °C (-4 to 158 °F) Humidity 20% to 80% non-condensing Weight 560 g DCS-3112 Certifications CE (Class A), LVD, FCC (Class A), ICES-003, C-Tick Dimensions 180.4 135.9 139.4 D-Link DCS-3112 User Manual...