Clearing Ssl Statistics; Showing Ssl Flows - Cisco 11503 - CSS Content Services Switch Configuration Manual

Clearing SSL Statistics

Clearing SSL Statistics

Showing SSL Flows

Cisco Content Services Switch SSL Configuration Guide
7-24
Use the clear ssl statistics command to clear the SSL statistics counters for all
SSL modules in the CSS chassis. The reset statistics appear as 0 in the show ssl
statistics display.
To clear SSL statistics counters for a specific module, use the clear ssl statistics
command and specify the slot number following the command. The valid slot
entries are 2 and 3 (CSS 11503) or 2 to 6 (CSS 11506).
To clear the SSL statistics counter, enter:
# clear ssl statistics
Use the show ssl flows command to display information about the active flows for
each VIP address, port, and SSL module. The output displays TCP proxy flows,
active SSL flows (a subset of TCP proxy flows), and SSL flows occurring during
the handshake phase of the protocol (a subset of active SSL flows).
The syntax for this command is:
show ssl flows {slot number}
The slot number option displays information about the active flows for a specific
SSL module in the CSS chassis (assuming more than one module is installed). The
valid slot entries are 2 and 3 (CSS 11503) or 2 to 6 (CSS 11506). If no slot number
is specified, the show ssl flows command displays statistics for all installed SSL
modules.
To view SSL flows for all SSL modules in the CSS, enter:
# show ssl flows
To view SSL flows for a specific SSL module in the CSS chassis (for example,
installed in slot 5), enter:
# show ssl flows slot 5
Chapter 7 Displaying SSL Configuration Information and Statistics
OL-5655-01