Showing Ssl Rsa Private Keys - Cisco 11503 - CSS Content Services Switch Configuration Manual

Showing Certificate and Key Pair Information

Showing SSL RSA Private Keys

Note
Cisco Content Services Switch SSL Configuration Guide
7-4
Table 7-2 Field Descriptions for the show ssl associate cert certname
Command (continued)
Field
X509v3 Basic
Constraints
Netscape Comment
X509v3 Subject Key
Identifier
X509v3 Authority
Key Identifier
Signature Algorithm
Hex Numbers
Use the show ssl associate rsakey keyname command to obtain information about
RSA private key associations in the CSS. You can optionally specify an RSA key
name to view information about a specific RSA key association (key size and
type). If you do not specify an RSA keyname, you see a list of all RSA key
associations.
When you view the contents of a specific key only, specifics on the key size and
key type appears. This restriction occurs because the key contents are secure and
should not be viewed.
Chapter 7 Displaying SSL Configuration Information and Statistics
Description
Indicates if the subject may act as a CA, with the
certified public key being used to verify certificate
signatures. If so, a certification path length
constraint may also be specified.
A comment that may be displayed when the
certificate is viewed.
Identifies the public key being certified. It enables
distinct keys used by the same subject to be
differentiated (for example, as key updating occurs).
Identifies the public key to be used to verify the
signature on this certificate or CRL. It enables
distinct keys used by the same CA to be
distinguished (for example, as key updating occurs).
The name of the algorithm used for digital signatures
(but not for key exchanges).
The actual signature of the certificate. The client can
regenerate this signature using the specified
algorithm to make sure that the certificate data has
not been changed.
OL-5655-01