Configuration Summary (Telecommuter Example - NETGEAR DG834Gv1 - 54 Mbps Wireless ADSL Firewall Modem Reference Manual

Figure F-11: ping 172.23.9.1
Note: The pings may fail the first time. If this happens, try the pings a second time.

Configuration Summary (Telecommuter Example)

The configuration in this document follows the addressing and configuration mechanics defined
by the VPN Consortium. Gather all the necessary information before you begin the configuration
process. Verify whether the firmware is up to date, all of the addresses that will be necessary, and
all of the parameters that need to be set on both sides. Assure that there are no firewall restrictions.
Table F-1. Configuration summary (telecommuter example)
VPN Consortium Scenario:
Type of VPN:
Security Scheme:
Date Tested:
Model/Firmware Tested:
Gateway
Client
IP Addressing:
Gateway
Client
NETGEAR VPN Configuration
Reference Manual for the Model Wireless ADSL Firewall Router DG834G
Scenario 1
PC/client-to-gateway, with client behind NAT router
IKE with Preshared Secret/Key (not Certificate-based)
May 2005
DG834G firmware version v2.10.20
NETGEAR ProSafe VPN Client v10.5.1 (build 8)
Fully Qualified Domain Name (FQDN)
Dynamic
202-10006-05, June 2005
F-13