Step-By-Step Configuration - NETGEAR DG834Gv1 - 54 Mbps Wireless ADSL Firewall Modem Reference Manual

Reference Manual for the Model Wireless ADSL Firewall Router DG834G
10.5.6.0/24
LAN IP
10.5.6.1
Figure F-1: Addressing and Subnet Used for Examples
Note: Product updates are available on the NETGEAR, Inc. web site at
http://kbserver.netgear.com/DG834G.asp.

Step-By-Step Configuration

Configure the DG834G as in the Gateway-to-Gateway procedures using the VPN Wizard (see
1.
"How to Set Up a Gateway-to-Gateway VPN Configuration" on page
use appropriate network addresses for the environment.
The LAN Addresses used in this example are as follows.
• DG834G
WAN IP = 14.15.16.17
LAN IP = 10.5.6.1
LAN Subnet Mask = 255.255.255.0
• FVL328
WAN IP = 22.23.24.25
LAN IP = 172.23.9.1
LAN Subnet Mask = 255.255.255.0
In Step 1, enter toFVL328 for the Connection Name.
a.
In Step 2, enter 22.23.24.25 for the remote WAN's IP address.
b.
In Step 3, enter the following:
c.
• IP Address = 172.23.9.1
• Subnet Mask = 255.255.255.0
F-2
VPNC Example
Network Interface Addressing
Gateway A
14.15.16.17
WAN IP
DG834G
202-10006-05, June 2005
Gateway B
22.23.24.25
WAN IP
FVL328
NETGEAR VPN Configuration
172.23.9.0/24
LAN IP
172.23.9.1
8-20), being certain to