Operating Your Breville Avance Ultimate Wok; Before First Use - Breville EW40 Instructions For Use Manual

Operating your Breville Avance Ultimate Wok

Before first use

• It is recommended you remove any promotional
labels and wash your Avance Ultimate Wok and lid
in hot soapy water. Rinse and thoroughly dry.
Before inserting temperature control probe into
the wok socket ensure the interior of the socket is
fully dry. To do this, shake out excess water then
wipe the interior of the socket with a dry cloth.
• The base is removable for easy cleaning
(see page 10).
• Do not immerse the cord and/or temperature
control probe in water or any other liquid.
Operating your Avance Ultimate Wok
1. With the push-lever removable base button in
the 'unlock' position, place the Avance Ultimate
Wok into the outer housing. Ensure the wok is
firmly located on the base tray then move the
Push-Lever button to the 'lock' position.
NEVER OPERATE THE AVANCE ULTIMATE WOK WITHOUT THE BASE POSITIONED DIRECTLY
IN PLACE.
THE AVANCE ULTIMATE WOK gETS VERY HOT DURINg USE, ALLOW THE UNIT TO COOL
BEFORE MOVINg OR STORINg.

. Insert the temperature control probe into the
socket at the side of the Avance Ultimate Wok.
Plug into a 30/40v power outlet and switch
'ON'. Always insert the heat controller into the
appliance first, then plug into main power outlet.
3. Preheat the Avance Ultimate Wok on the
'High Sear' setting for approximately 10 minutes.
The thermostat 'ON' light will illuminate on the
heat control indicating the temperature at which
the dial is set.
Note
4. When the thermostat light goes out this indicates
the wok has reached its set temperature. The
wok is now ready for use. The thermostat light
will cycle on and off throughout cooking as the
temperature is maintained by the thermostat.
. When cooking is completed, turn temperature
control knob to the 'OFF' position ('MIN' on dial)
before switching off at the power outlet. Unplug
from power outlet. Leave temperature control
probe connected to the appliance until cool.
The Avance Ultimate Wok must be used with
the temperature control probe provided. Do
not use any other temperature control probe or
connector.
When stir fry cooking and a high heat is required,
set temperature dial to 'High Sear' and allow
thermostat light to cycle on and off several
times. This will allow the cooking surface to
adjust to a more accurate cooking temperature.
Note