Table of Contents
Advertisement
3-6
Option Installation
Figure Section 3-2 Releasing the System Unit Cover
5.
Pull the cover up and free it from the chassis.
To replace the system unit cover, see "Replacing the System Unit Cover."
Replacing the System Unit Cover
1.
Position the cover on the side of the system unit about one inch back from the
front panel. Turn off and unplug the system unit.
Insert the metal tabs on the top of the system unit cover into their slots on the
2.
chassis.
Insert the metal tabs on the bottom of the cover into the slots on the chassis (see
3.
Figure Section 3-4).
CAUTION: To prevent damage to system
cables, carefully tuck the cables out of the path
of the cover.
Advertisement
Table of Contents
Troubleshooting
