Replacing The System Unit Cover - NEC POWERMATE P ETC User Manual

Replacing the System Unit Cover

Replace the system unit cover as follows.
Insert the metal tabs on the top of the system cover into
1.
their slots on the chassis.
Insert the metal tabs on the bottom of the system cover
2.
into their slots on the chassis.
3. Slide the cover forward to meet the front panel.
NOTE
slide all the way to the front panel, place one hand
on the front of the unit while you slide the cover
forward from the rear.
The cover fits tightly. If the cover does not
Replacing the cover
Installing Options 3-7