Rack-Mounting The Chassis; Attaching The Brackets - Cisco CISCO2515-RF - 2515 Router User Manual

Rack-Mounting the Chassis

This section describes the procedures for rack-mounting the chassis. The chassis comes
with brackets for use with a 19-inch rack or, if specified in your order, optional larger
brackets for use with a 24-inch rack. The brackets are shown in Figure 3-3.
Figure 3-3
Bracket for use
with a 19-inch rack

Attaching the Brackets

To install the chassis in a rack, attach the brackets in one of the following ways:
•
With the front panel forward (see Figure 3-4)
•
With the rear panel forward (see Figure 3-5)
•
In a center-mount telco rack (see Figure 3-6)
Note
chassis. The second bracket connects to the opposite side of the chassis.
Identifying the Brackets
Bracket for use
with a 24-inch rack
The illustrations that follow show how to connect the bracket to one side of the
Setting Up the Chassis
Installing the Router 3-5