Cisco CISCO2515-RF - 2515 Router User Manual page 69

Table 4-2
Mode of
Operation Usage
User EXEC User EXEC commands allow you to
connect to remote devices, change
terminal settings on a temporary
basis, perform basic tests, and list
system information. The EXEC
commands available at the user level
are a subset of those available at the
privileged level.
Privileged EXEC Privileged EXEC commands set
operating parameters. The
privileged command set includes
those commands contained in user
EXEC mode, and also the configure
command through which you can
access the remaining command
modes. Privileged EXEC mode also
includes high-level testing
commands, such as debug.
Global Global configuration commands
configuration apply to features that affect the
system as a whole.
Cisco IOS Operating Modes
How to Enter the Mode
Log in.
From user EXEC mode, enter the
enable EXEC command.
From global configuration mode,
enter the configure privileged
EXEC command.
Cisco IOS Software Basics
Prompt
Router>
Router#
Router(config)#
Configuring the Router 4-15