Advertisement
POSSIBLE PROBLEM
Steam is being released
from the rim
Delay timer not working
(cooking finishes earlier
or later than expected)
Delay timer cooking
complete delay
The start or cancel
function is not
operational
20
POSSIBLE REASON
Uneven placement of
cooking bowl
Rice has not been rinsed
thoroughly enough
Incorrect rice to water ratio
There is rice stuck to the
rim of the inner pot and/
or seal
The lid might not have
been closed during the
cooking process
The sensor, heating
element, outer surface of
the cooking bowl, or inner
pot might not have been
properly cleaned
Steam vent, inner lid, seal
ring or heating plate is
not clean
The delay time set could
be shorter than fuzzy
logic calculated or preset
cooking function time. For
example, delay time set for
1:00 hour, cooking time
required is 2:30 hours
The rice quantity might
have exceeded the amount
of water used
The inner pot and
appliance connector might
not have been
correctly inserted
SOLUTION
•
Ensure that the removable bowl is placed
correctly prior to cooking
•
Rinse rice until water runs clear prior
to cooking
•
Ensure that water is filled to the correct line
marking prior to cooking
•
Adhere to the provided cleaning instructions
•
Ensure the lid is closed completely prior
to cooking
•
Adhere to the provided cleaning instructions
•
Adhere to the provided cleaning instructions
•
Be certain to establish a delay time that
surpasses the cooking duration. The delay
time signifies that the unit will conclude
cooking precisely at the designated
delay time
•
The rice and water might not have been
accurately measured. Check water to rice ratio
using line markings provided in
cooking bowl
•
Follow assembly instruction
Advertisement
