Table of Contents
Advertisement
Installation Overview
Figure 83: Removing the SFP port plug
1
Do not discard the plug unless you are sure the SFP port will never need to be sealed in the future.
a) Place the AP on its back (resting on the heat fins) on a stable but padded surface to avoid scratching the
paint.
b) Using a 12-mm wrench or large flat blade, or Philips screwdriver, turn the SFP port plug counterclockwise
and remove it.
Step 3
Insert the SFP module into the SFP port and ensure that it latches properly.
Step 4
Loosen and dis-assemble the SFP adapter gland components.
Figure 84: Exploded view of Fiber-Optic cable and Gland assembly
1
SFP Transceiver Module
SFP Port Plug
Cisco Catalyst 9124AX Series Outdoor Access Point Hardware Installation Guide
Connecting a Fiber-optic Cable to the AP (AIR-SFP-KIT1=)
5
Gland Compression Ferrule
77
Advertisement
Table of Contents
