Table of Contents
Advertisement
Installation Overview
1
Power supply
2
Screw holes for four #8-32 screws.
3
One of four M6 keyhole slots for mounting the
AP on the bracket.
Before you begin
Ensure that you have the following materials before beginning to mount the AP to a pole:
Table 6: Materials Needed to Mount the AP using AIR-MNT-VERT2= Kit
Materials Needed
One wall mount bracket
Four M6 x12 mm hex head bolts
Four #8-32 screws to mount the power supply
Three stainless steel band clamps (adjustable 2 to 5 inch (51 to 127 mm)
Cisco Catalyst 9124AX Series Outdoor Access Point Hardware Installation Guide
Vertically Mounting the AP with DC Supply to a Pole
4
Band clamp slots for passing the clamps through.
5
Steel band clamps.
Supplied in the
Kit?
Yes
Yes
Yes
Yes
47
Advertisement
Table of Contents
