Grizzly G0443HEP Manual page 38

15. Connect the gray flexible hose from the out-
let port to the canister adapter and secure
it in place with the two 7" hose clamps, as
shown in figure 22.
figure 22. gray hose properly installed.
16. attach the casters to the bottom of the lower
collection drum, as shown in figure 23, using
the (4) ⁄ "-16 hex nuts, (8)
3
8
and (4) ⁄ " lock washers included in the box
3
8
with the casters.
figure 23. Cut-away illustration of casters
attached to the lower collection drum.
-20-
⁄ " flat washers,
3
8
17. install the drum latches, as shown in figure
24, with the (6) #10-24 x
screws and (6) #10-24 hex nuts included in
the box with the drum latches. Make sure the
hex nuts are on the outside of the drum so
that they will not snag the plastic collection
bag.
figure 24. installing drum latches on collector
drum.
18. place the collection drum vacuum ring
on the bottom of the collection drum (see
figure 25).
Note: During operation, this ring and the
vacuum connection to the cyclone funnel will
prevent the collection bag from collapsing.
figure 25. inserting collection drum vacuum
ring.
Model g0443 (Mfg. since 11/09)
⁄ " phillips head
3
8