Grizzly G0443HEP Manual page 37

12. Attach the outlet port and filter L-braces to
the blower housing with the outlet gasket
between the outlet port and the housing, as
shown in Figures 18–19, using (8)
1" hex bolts, (16)
⁄ "-18 hex nuts.
5
16
Note: One of the braces attaches directly to
the housing with the following hardware: (2)
⁄ "-18 x 1" hex bolts, (4)
5
16
and (2) ⁄ "-18 hex nuts.
5
16
Figure 18. Outlet port and filter L-braces
installed.
Outlet Gasket Here
Figure 19. Model G0443 outlet port and filter
L-braces installed.
Model G0443 (Mfg. Since 11/09)
⁄ "-18 x
5
16
⁄ " flat washers, and (8)
5
16
⁄ " flat washers,
5
16
13. Mount the filter to the L-braces with the brace
gaskets between them, as shown in Figure
20, using (4) ⁄ "-18 x
5
16
⁄ " fender washers.
5
16
Brace Gasket Here
x 4
Figure 20. Mounting filters to the braces.
14. Apply the 3 x 15mm foam tape to the edges
of the outlet port and the canister adapter, as
shown in Figure 21.
Foam
Tape
Figure 21. Foam tape applied to the outlet port
and canister adapter.
Note: It may be necessary to reposition the can-
ister L-braces down one bolt hole or shorten the
length of the longer piece of flexible hose to acco-
modate the bend in the hose.
⁄ " hex bolts and (4)
3
4
-19-