Makita GA049G Instruction Manual page 15

Installing abrasive cut-off / diamond
wheel
Optional accessory
When using an abrasive cut-off
WARNING:
/ diamond wheel, be sure to use only the special
wheel guard designed for use with cut-off wheels.
NEVER use cut-off wheel for side
WARNING:
grinding.
CAUTION:
When installing the diamond
wheel, be sure to align the direction of the arrow
on the wheel with the arrow on the tool.
2
Fig.19
► 1. Lock nut 2. Abrasive cut-off wheel / diamond
wheel 3. Inner flange 4. Wheel guard for abrasive
cut-off wheel / diamond wheel
As for the installation, follow the instructions for
depressed center wheel.
The direction for mounting the lock nut and the inner
flange varies by wheel type and thickness.
Refer to the following figures.
For 100 mm (4") model
When installing the abrasive cut-off wheel:
16 mm (5/8")
Fig.20
► 1. Lock nut 2. Abrasive cut-off wheel (Thinner than 4 mm
(5/32")) 3. Abrasive cut-off wheel (4 mm (5/32") or thicker)
4. Inner flange
1
3
4
1 1
2 3
16 mm (5/8")
4
4
When installing the diamond wheel:
Fig.21
► 1. Lock nut 2. Diamond wheel (Thinner than 4 mm
(5/32")) 3. Diamond wheel (4 mm (5/32") or thicker)
4. Inner flange
For model other than 100 mm (4")
When installing the abrasive cut-off wheel:
Fig.22
► 1. Lock nut 2. Abrasive cut-off wheel (Thinner than 4 mm
(5/32")) 3. Abrasive cut-off wheel (4 mm (5/32") or thicker)
4. Inner flange
When installing the diamond wheel:
Fig.23
► 1. Lock nut 2. Diamond wheel (Thinner than 4 mm
(5/32")) 3. Diamond wheel (4 mm (5/32") or thicker)
4. Inner flange
15 ENGLISH
1 1
2 3
4
4
1 1
2 3
4 4
1 1
2 3
4 4