Advertisement
Available languages
Available languages
Maintenance routine
1.
Drain water from the air tank, any moisture sepa-
rators or air filter regulators.
2.
Check for any unusual noise and/or vibration.
3.
Inspect air filter, replace if necessary.
4.
Inspect air lines and fittings for leaks and correct as
necessary. Each year of operation or if a problem is suspected,
check condition of check valve. Replace if damaged or worn out.
5.
Keep all screws, bolts, and covers tightly
mounted. Check their conditions periodically.
WARNING:
Keep all screws, bolts and covers
properly tightened. If screws, bolts or covers
become loose personal injury or property damage
may occur.
Recommended interval of inspection and maintenance
Inspect and maintain the compressor within the period as described in the following table.
Part
Overall
Inspect for unusual
noise and vibration
Clean off dirt and
dust with dry air.
Air lines and fittings
Inspect for leakage
Air tank
Exhaust all air and
drain condensation
in the air tank. (open
the drain valve.)
Inspect for
scratches, dents, or
leakage.
Inspect rust, pin
holes, or other
imperfections that
could cause it to
become unsafe.
Bolts and nuts
Inspect for
tightness.
Handle
Wipe off oil and
grease.
Cut-out pressure
Check and adjust.
Air filter
Clean or replace if
necessary.
Lubrication
This air compressor is equipped with an Oil-Less pump
designed for durability and no maintenance.
Storage
Before you store the air compressor, make sure you do
the following:
•
Review the "MAINTENANCE" and "OPEATION"
sections and perform maintenance as necessary.
Be sure to drain water from the air tank.
•
Protect the air hose from damage (such as being
stepped on or run over).
Store the air compressor in a clean and dry location.
Action
Daily
(before/after use)
-
-
-
-
-
-
Weekly
-
-
-
-
-
-
11 ENGLISH
Monthly
Quarterly
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Advertisement
