Advertisement
6
5
Connect the wires for AC power as appropriate for the intended AC power operation. The screw terminals should be torqued
to 4 inch-pounds (0.452 Newton-meters) to 5 inch-pounds (0.565 Newton-meters).
6
Depending on how you are installing the meter, handle the fuse in one of the following ways:
-
If the battery is being installed at a later time, leave the fuse in the parts bag & keep the parts bag attached to inside the
enclosure lid. You will insert the fuse when you install the battery (see "Installing the battery" on page 7).
-
If you are installing the device with the battery already present, insert the fuse (provided in the parts bag attached to
the inside of the enclosure lid) into the fuse connector [8].
7
Verify that all the connections are secure, including the following: the protective earth connections, the temperature sensor
(if installing with a battery), and the AC power supply.
IL42-5150E
Advertisement
