1
The serial number/iLO information pull tab is double-sided. One side shows the server serial number and the customer asset tag label.
The other side shows the default iLO account information.
Depending on the type of drive backplane installed, the server supports SFF SAS, SATA, or U.3 NVMe drives.
2
iLO Service Port
When you have physical access to a server, you can use the Service Port to do the following:
•
Download the Active Health System Log to a supported USB flash drive.
When you use this feature, the connected USB flash drive is not accessible by the host operating system.
•
Connect a client (such as a laptop) with a supported USB to Ethernet adapter to access the following:
◦
iLO web interface
◦
Remote console
◦
iLO RESTful API
◦
CLI
When you use the iLO Service Port:
•
Actions are logged in the iLO event log.
•
The server UID flashes to indicate the Service Port status.
You can also retrieve the Service Port status by using a REST client and the iLO RESTful API.
•
You cannot use the Service Port to boot any device within the server, or the server itself.
•
You cannot access the server by connecting to the Service Port.
•
You cannot access the connected device from the server.
Front panel LEDs and buttons
Component identification
9