Server Uid Led - Hitachi HA825 G3 Series User Manual

Item
1
2
3
4
1 When all LEDs flash simultaneously, a power fault has occurred. For more information, see Front panel LED power fault codes.
2
Facility power is not present, power cord is not attached, no power supplies are installed, power supply failure has occurred, or the front
I/O cable is disconnected.
3
If the health LED indicates a degraded or critical state, use iLO to

Server UID LED

The UID LED is used to locate a particular server when it is deployed in a dense rack with other equipment. Activating the
UID LED helps an on-site technician to quickly identify a server for maintenance tasks.
Description
Power On/Standby button and
1
system power LED
1
Health LED
1
NIC status LED
1
UID button/LED
Status Definition
Solid green System on
Flashing green Performing power-on sequence
Solid amber System in standby
No power present
Off
Solid green Normal
Flashing green iLO is rebooting
Flashing amber System degraded
System critical
Flashing red
Solid green Linked to network
Flashing green Network active
Off No network activity
Solid blue Activated
Flashing blue • 1 flash per second—Remote
management or firmware upgrade in
progress
• 4 flashes per second—iLO manual
reboot sequence initiated
• 8 flashes per second—iLO manual
reboot sequence in progress
Off Deactivated
review the system health
2
3
3
status.
Component identification
10