Advertisement
REMOTE CONTROL UNIT FACILITIES
Range of remote control
When the remote control unit is pointed at the REMOTE SENSOR
window on the deck receiver and any of its keys is pressed, the
cassette deck receiver and other components can be operated by
remote control.
Distance: Within a range of about 7 meters from the REMOTE
SENSOR window.
Angle: Within approx. 30 degrees from the center of the REMOTE
SENSOR window.
Remote
contro!
will not be possible
if there
is an obstacle
between
the remote
control
unit and the REMOTE
SENSOR
window.
Performance of the remote control unit is adversely affected in
the presence of strong fluorescent light. Keep such lights away,
specially from the sensor window.
PUTTING
BATTERIES
INTO
THE
REMOTE
CONTROL UNIT
[1]
Remove the cover of the battery compartment on the rear
side of the remote control unit.
[2] Take out the two size "AAA"
[IEC RO3 (UM-4)] dry ceil
batteries
supplied
and
{ioad
them
into
the
battery
compartment, correctly matching the plus © and minus ©
as indicated inside the compartment.
[3]
Replace the cover of the battery compartment.
Cautions for handling dry cell batteries.
Misusing dry cell batteries can result in electrolyte leakage or
explosions, Bear in mind the following points for getting the most
out of your batteries.
e
When
loading
the
batteries
into the
battery
compartment,
make sure the plus ® and minus © polarities correspond to the
markings on the compartment.
® Even though they may be the same shape, batteries come with
different
voltage
ratings.
Do
not
use
different
types
of
batteries together. Use only the same kind of batteries.
* Do not mix up new batteries and used batteries but replace all
the batteries at the same time.
NOTE:
RX-730S, RX-1320S, RX-731S are provided with Programmable
Remote Contro/ Unit.
For operation of the Programmable Remote Control Unit refer to
the seperate Operating Instructions.
@ POWER key
@ VOLUME key: - (down), + (up)
Increases/decreases the sound volume of the unit.
[When used with the SHIFT key]
Increases/decreases the sound volume of TV set.
@ FUNCTION selector keys
For selecting V/AUX (VIDEO/AUX), TUNER or PHONO.
[When used with the SHIFT key]
Can be used to select VCR1, VCR2 or VDP functions,
NOTE:
This function can be used with Pioneer products with [
mark
which are provided with the input selector for VCR1, VCR2 and
VDP. with a system where the optional AV surround processor
VSP-333
is installed,
its video input selector can
be used.
Precautions on using the system in combination with VSP-333.
@ When selecting V/AUX, the mode of the input selector of VSP-
333 does not change to AUDIO. Set to AUDIO by using the
INPUT SELECTOR of VSP-333.
@ When
VCR1,
VCR2
or VDP
is selected, the mode
of the
FUNCTION selector of this unit changes to VIDEO/AUX.
@ SUR (surround) key
For selecting surround mode.
© DECK | operation keys
od
Forward playback (AUTO FUNCTION)
<a.
Reverse playback (AUTO FUNCTION)
<iq
Fast (reverse)
>>
-
Fast (forward)
|
Stop
© DECK Il operation keys
-
Forward playback (AUTO FUNCTION)
-
Reverse playback (AUTO FUNCTION)
Fast (forward)
Fast (reverse)
Stop
Recording standby
Pause
3
<ARB1246>
Advertisement
