Advertisement
SETTING THE CLOCK
This unit has a 24-hour clock display.
CLOCK ADJ switch.
SET switch.
+,— switches.
1. Press CLOCK ADJ switch.
2. Use
"—" and "+" switches to set the hour.
BASIC OPERATIONS
3. Press SET switch.
4. Use
"—" and "+"
switches to set the minute.
5. Press SET switch when
"00" seconds of that
minute are reached for precise adjustment.
° After connecting
to an
AC
outlet,
be sure to set the
present time.
@ The time indication will appear as
" if the AC power
cord
is unplugged.
Be sure to set the time again after
power is resumed.
1
RECORD PLAY (PL-203AZ/PL-223AZ/PL-223Z)
1. Perform the preliminary operations.
2. Place the record on the platter mat.
3. Remove
the stylus cover and release the tonearm from the
arm rest.
4. Set the SPEED switch.
5. Move the ARM ELEVATION switch to the UP position.
6, Move the tonearm by hand across the record. At this stage,
the platter starts to rotate.
7. Move the ARM ELEVATION switch to the DOWN
position.
8. Adjust the volume with the VOLUME
control and the tone
with the GRAPHIC EQUALIZER controls.
9. To stop the player, press the STOP switch.
LISTENING TO THE BROADCASTS
BAND selector switch
MEMORY |
STATION CALL
yy
switches
switches
1. Perform the preliminary operations.
2. Select
your
desired
broadcasting
band
using
the
BAND
selector switch.
3. Press the TUNING
switch to locate the frequency of your
desired station.
Auto tuning:
Press the tuning switch until the
frequency starts to change (about ,
1seconds}, then release it.
The tuner will automatically search for a broadcasting station,
and stop when one is found. To search for another station, press
again.
e To interrupt auto tuning, press the TUNING switch again.
NOTE:
When AUTO
TUNING is in use, reception may not be possible
over long distances or when signals are weak. At these times
MANUAL
TUNING is recommended.
Manual tuning:
Press and release quickly.
Bb as
<ARB1246>
The tuning frequency will change
by one step each time the
switch is pressed. Press as many times as necessary to tune in
the desired sxation.
® |f the switch is held depressed for more than approximately 2
seconds,
the reception frequency
will change
continuously,
and stop when the switch is released.
NOTE:
The TUNED indicator will not function for broadcasts received
over long distances or when signals are weak.
4. Adjust the volume
with the VOLUME
control and the tone
with the GRAPHIC EQUALIZER controls.
PRESETTING STATIONS
Presetting
From 1 to 24 FM/AM stations can be preset at random. Press the
STATION CALL switch once for 1 -
12 (Mode 1) and twice for 13 -
24 (Mode 2).
The setting of the FM MONO
switch is aiso recorded with the
preset station frequency.
1. Tune in desired station.
° See "LISTENING
TO
THE
BROADCASTS"
section for
information on reception.
2. Press the MEMORY switch.
° The display will flash (about 5 seconds),
A
3. Press one of the STATION CALL switch.
e While
the
display
is
flashing,
press
the
switch
corresponding to the station which you wish to preset or
re-preset.
Frequency
display
When presetting a station to Mode 1 (e.g. presetting a station
to No. 9):
By pressing the STATION
CALL 9/21 switch once, the station
will be preset to Mode 1.
Frequency
9/21
display
D
STATION CALL
Press once
switch number
Advertisement
