Advertisement
PANEL FACILITIES
6 © @
()——_
aEZ
@
@
8 @
TUNER SECTION
@ Display section
{
|
TUNED [aTEREO
MONO
im Wa Wa Gamo
eS
a Tal ae 1 A Ye aa GOs
® MONO indicator
Lights when
the FM
MONO
switch
is set to ON. When
this
indicator is lit, FM stereo broadcasts are reproduced monaurally.
@® TUNED indicator
Lights when a broadcast is received and turned in well.
© STEREO indicator
Lights when
an FM
stereo
broadcast
is received
(FM MONO
switch is set to OFF).
©
DECK Hl indicator
Lights when deck II is recording.
©
SLEEP indicator
Indicates that the sleep timer is activated.
®
Frequency display
Shows received broadcast frequency. Also gives scrolling display
of main function status.
FM and MHz light: FM reception.
AM and kHz light: AM reception.
Messages will be displayed when setting time and when turning
the power ON/OFF.
©
Time display
This shows the present time and during recording on deck Ii, it
shows the elapsed recording time.
@
DECK i} REC TIME indicator
Lights when deck I! is recording.
@
Remote control indicator
Flashes
when
a command
is being
received
from the remote
control unit.
@ STATION CALL switches
These
are used to recall preset broadcasting
stations and to
preset the station.
@) Time switches
Used for starting the clock adjustment.
@ FM MONO switch
Normatly, the MONO
indicator remains off. However, it may not
be possible to tune in a desired FM station because it is too far
away or because its signals are too weak. In cases like these,
press
the switch
to set the reception to the monaural
mode
(MONO indicator lights) and tune in the station. The program of
an FM stereo broadcast will be heard in mono. This switch will
not
function
for
AM
reception.
The
FM
MONO
setting
is
memorized
along
with
station
frequency
when
presetting
a
station.
© MEMORY switch
This switch is used to memorize stations. When the switch is
pressed,
the
frequency
display
will flash.
To
memorize
the
frequency of any station, press one of the STATION CALL switch
while the frequency indicator is flashing.
© BAND selector switch (FM/ AM)
This is used to select the band of the desired station. The bands
change alternately each time the switch is pressed.
> FM reception
. AM reception ——
@ —, + switches
[During tuning]
These are used for locating stations.
Used
"—"
switch
for
lower,
and
"+"
switch
for
higher
frequencies.
{During time setting]
Used for adjusting the clock.
7g
<ARB1246>
Advertisement
