Advertisement
PANEL FACILITIES
AMPLIFIER SECTION
@ MULTI-ROOM REMOTE indicator
G) POWER STANDBY/ON
switch
ON:
When set to the ON position, power is supplied and
the unit becomes operational.
STANDBY:
When
set to the
STANDBY
position,
the
main
power flow is cut and the unit is no longer fully
operational. A minute flow of power feeds the unit
to maintain operation readiness.
{The tuner section display shows only the time.}
Disconnect the power cord from the power outlet when you do
not plan to use the cassette tape deck receiver for a long period
of time.
The cassette tape deck receiver has a backup function, so it
will return to the original status
when
the power cord is
unplugged and soon again plugged into the power outlet.
(Q REMOTE SENSOR window
() PHONES jack
This is a "standard plug-type jack" for headphones.
(2 SPEAKERS A/B switches ON
= /OFF &
[ON]:
Depressed
position:
Sound
is heard
from the speaker
systems.
[OFF]
Released position: No sound is heard from the speaker
systems.
NOTE:
When
the speaker system
is connected
to only one speaker
terminal (A or B) and both A and B selector switches are ON,
there will be no sound,
Turn
ON only the selector to which
the speaker system
is
connected.
@ VOLUME control/indicator
The volume is increased when this control is turned clockwise,
decreased when turned counterclockwise. When operating with
the remote control unit, the control automatically turns clockwise
when "+" is pressed, counterclockwise when "-" is pressed.
@ BALANCE control
Usually
set this
control
to the
central
position.
!f turned
counterclockwise, the volume of the right channel will decrease.
if turned clockwise, the volume of the left channel will decrease.
@ FUNCTION switches/indicators
The indicators light for the specified functions. See page 11 for
details.
GRAPHIC EQUALIZER SECTION
See page 11 for details.
(8 GRAPHIC EQUALIZER controls
@ SPECTRUM
ANALYZER
display
CASSETTE DECK SECTION
°
The cassette deck receiver is provided with an automatic tape
selector function.
Deckl.....
NORMAL/CrO2/METAL
Deck Il... .. NORMAL/CrO,
8 DECK il COUNTER and reset switch
3-digit display measures tape travel on deck H.
(9 Indicators
Direction (<1, >}:
Show direction of tape travel.
Blinks during DECK If PAUSE mode.
REC {or ©}:
Lights when recording. Flashes when copying
a tape.
Slow flashing = Normal copy
Rapid flashing = High speed copy
8
<ARB1246>
@ Deck | Operation switches
&
EJECT
-
Ejection
® (PLAY: FWD)
For playing back a tape in the forward mode.
The FUNCTION selector swithces to TAPE.
{AUTO FUNCTION)
"@(PLAY: REV)
---
For playing back a tape in the reverse mode.
The FUNCTION selector swithces to TAPE.
{AUTO
FUNCTION}
For stopping the tape.
Fast forward in forward mode, rewind in
reverse mode.
"G<@(FAST) vo
Rewind in forward mode, fast forward in
reverse mode.
@ DOLBY*
NR switch
Set to activate noise reduction system. Use to play back tapes
recorded using Dolby B NR.
® Tapes recorded using Dolby B NR should always be played
back with the noise reduction system on. Sound quality will be
adversely affected if they are played back with the system off,
or if tapes recorded using a different noise reduction system
are played back with the Dolby B NR system on.
®
Itis recommended that tapes recorded using Dolby B NR be so
marked on the label. This will help to prevent incorrect setting
of the noise reduction switch during playback.
ER(STOP) --
Bb (FAST)
Dolby noise reduction
manufactured
under license from Dolby
Laboratories Licensing Corporation.
"Dolby" and the double-D symbol [](Jare trademarks of Dolby
:
Laboratories Licensing Corporation.
iy
@ COPY MODE switches
These switches are used to select the copy mode,
L
HIGH:
5c cca55
High speed copying (double-speed, halftime
.
copying)
A
NORMAL
.....
Normal speed copying
i "
@ REV (REVERSE) MODE switch
Switch position
During playback
During recording
dt
Plays both tape sides. | Records on one side
When one deck
(Deck II only).
finishes playback, the
other deck begins
playback of both tape
sides for 6 times.
If there is a tape in
only one deck, then
that deck
continuously plays
both sides of the tape
for 6 times.
RELAY
REC
PLAY
=
t
REC
PLAY
| =>
>
| for 6 times.
2 DECK If switches
REC (@) crete eesene
To set to recording standby mode.
Recording begins when you press the PLAY
switch (<¢@ or B}.
PAUSE (88)...
Temporarily stops tape travel. Cancels
pause mode when pressed again or press the
PLAY switch
@ DECK Hl Operation switches:
Same as Deck | operation switches
Plays both tape sides | Records on side
| (Deck II only).
@ MIC jack (Multi-voltage model only)
@ MIC MIXING
level! control (Multi-voitage model
only)
See page 15.
Advertisement
