Electrical Connection Of Pedal Button (For Bpw4260 Models Only) - Smeg BPW4260 User Manual

N.B.: the authorised engineer may set up the device so that the power cable and water
connection hoses are accessible through the rear of the device instead of through the side of
the stand.
7.2

ELECTRICAL CONNECTION OF PEDAL BUTTON (FOR BPW4260 MODELS ONLY)

For BPW4260 models with automatic door opening, once the device has been fixed to the stand (see point
6.1.3 PLACING AND FIXING THE DEVICE ON THE STAND) the pedal button cable must be connected to the
connector in the device's wiring, located at the rear.
This must be done by the authorised engineer who puts the product into service.
User Manual 193909105 rev.04 BPW1260 – BPW4260 Page 38 – 107