Casio Cassiopeia E-125 Service Manual And Parts List page 47

7. After that, this connection procedure will be
completed.
8. After this procedure is completed, the
display shown to the right appears.
9. After clicking Explore icon in the right
dialog box, click My Pocket PC icon.
10. Doing so, Storage Card holder icon will
appears.
"Storage Card" holder indicates CF card. If
CF card is not inserted into the slot, this
holder will not appear.
11. After clicking this icon, make a new holder
named jx650diag.
12. Make a new holder named
casioconfidential in jx650diag holder.
Perform these spellings precisely.
Otherwise, the installation of the diagnostic program can not be performed.
13. Enter diag.exe file in this casioconfidential holder.
Total directory is as follows;
Storage Card>jx650diag>casioconfidential>diag.exe
14. Doing so, the installation of the diagnostic
program to CF card and D-RAM in the unit
starts automatically.
15. While performing this installation, the
display shown to the right will appear.
16. Completing this installation, the display
shown to the right will appear.
* Once the diagnostic program is installed in
CF card and D-RAM in the unit, this
program is not deleted even if RESET
operation is performed.
17. After making diag holder in Storage Card
holder, enter diagboot.exe file into this diag
holder. Total directory is as follows;
Storage Card>diag>diagboot.exe
Note: diagboot.exe file is needed to make the diagnostic program development more easier.
This file may be applicable to all units adopted CF card in future.
18. Performing the following operation with the unit, confirm that the diagnostic program has been
installed in CF card according to the following procedure.
Tapping Start, Programs, File Explore, My documents, My Device, Storage Card, jx650diag,
and then casioconfidential holder using a stylus, diag icon will appear.
If diag icon appears, the diagnostic program is installed in CF card.
After tapping casioconfidential, tap Storage Card holder.
Tapping Storage Card, confirm that there is a diagboot icon in Storage Card holder.
Tapping this diag icon, Main Menu for this Operation Check display appears.
It is recommended to boot Operation Check using above operations.
— 44 —