Specifications; Intended Use; Power Supply - Makita M9502R Instruction Manual

Hide thumbs Also See for M9502R:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
ENGLISH (Original instructions)

SPECIFICATIONS

Model:
Applicable grinding wheel
Applicable cut-off wheel
Spindle thread
Max. spindle length
No load speed (n
) / Rated speed (n)
0
Overall length
Net weight
Safety class
Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
Specifications may differ from country to country.
The weight may differ depending on the attachment(s). The lightest and heaviest combinations, according to
EPTA-Procedure 01/2014, are shown in the table.
Symbols
The followings show the symbols which may be used
for the equipment. Be sure that you understand their
meaning before use.
Read instruction manual.
Wear safety glasses.
Always operate with two hands.
Do not use the wheel guard for cut-off
operations.
DOUBLE INSULATION
Only for EU countries
Due to the presence of hazardous compo-
nents in the equipment, used electrical and
electronic equipment may have a negative
impact on the environment and human
health.
Do not dispose of electrical and electronic
appliances with household waste!
In accordance with the European Directive
on waste electrical and electronic equipment
and its adaptation to national law, used
electrical and electronic equipment should
be collected separately and delivered to
a separate collection point for municipal
waste, operating in accordance with the
environmental protection regulations.
This is indicated by the symbol of the
crossed-out wheeled bin placed on the
equipment.
Max. wheel diameter
Max. wheel thickness
Max. wheel diameter
Max. wheel thickness
M9502R
115 mm
115 mm
M14 or 5/8" (country specific)
2.1 - 2.2 kg

Intended use

The tool is intended for grinding and cutting of metal
and stone materials without the use of water.

Power supply

The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated and can, therefore, also be used
from sockets without earth wire.
4 ENGLISH
M9503R
125 mm
7.2 mm
125 mm
3.2 mm
23 mm
-1
11,000 min
281 mm
2.1 - 2.3 kg
/II

Advertisement

Table of Contents
loading

This manual is also suitable for:

M9503rM9503rkM9502rk

Table of Contents